Series Circuit Diagram

Diagram8 nodesEducation · Series CircuitsMade from one prompt
Read-only preview

The prompt

Create a series circuit diagram with a battery and three resistors

Make your own version

About the framework

Add resistance around a single loop

This series circuit connects a 9V battery to R1 at 100 ohms, R2 at 220 ohms, and R3 at 330 ohms. A labeled return path leads through the ammeter back to the battery. Six connected nodes form the loop, and a separate calculation card shows total resistance of 650 ohms and current of 0.014A.

The displayed current is rounded: dividing 9V by 650 ohms gives approximately 0.01385A. The example assumes ideal components and does not include voltage-drop labels or battery internal resistance. Rectangles and other general shapes stand in for schematic symbols.

Adapt the diagram by changing one resistor and updating both the total and current. Add voltage drops beside each resistor to connect the loop drawing with a worked Ohm’s law exercise.

What's included

What you get

  • A single loop from a 9V battery through three resistors
  • Resistor values of 100, 220, and 330 ohms
  • An ammeter placed on the return side of the loop
  • A card showing 650 ohms total resistance and rounded current
Diagram

Series Circuit Diagram

physicselectronicscircuiteducationscience

✦ Free preview · Sign in to use

Frequently asked questions

Common questions

Why does the total resistance equal 650 ohms?

The resistors are in series, so their values add: 100 + 220 + 330 = 650 ohms.

Is the current exactly 0.014A?

No. That is the rounded value displayed in the sample. With an ideal 9V supply and 650 ohms, the calculated current is approximately 0.01385A.

Where is the ammeter connected?

The path returns from R3 through Return Path and the ammeter to the battery. It is in the same series loop as all three resistors.

Series Circuit Diagram

Free to start. No credit card required.

Free preview · Sign in to use